P-101 PFPE PTFE Food Grade NSF-H1 Certified Chemical Resistant Conductive Grease

- Type: PFPE PTFE food grade grease, high temperature conductive grease, NSF-H1 perfluoropolyether lubricant, chemical resistant bearing grease.

- Base Oil and Composition: Perfluoropolyether (PFPE) oil with polytetrafluoroethylene (PTFE) thickener; silicone-free
- Viscosity Grade: NLGI 2 (moderate consistency, suitable for automated lubrication systems)
- Operating Temperature Range: -40°C to 260°C (instantaneous tolerance up to 280°C as per certain references)
- Certifications:
    - FDA 21 CFR 178.3570 (Food-grade compliance)
    - NSF-H1 Registration (Approved for food processing environments)

- Packaging: 1KG, 25KG            

- We produce an electrically conductive grease formulated from perfluoropolyether (PFPE) base oil, special additives, and conductive carbon black thickener. It enhances the lubricity of contacting components, reduces wear, and effectively dissipates static electricity. It exhibits good compatibility with metals and is non-corrosive to metallic materials.    

- High-Temperature Stability: Low evaporation rate ensures long-term performance at 260°C, prevents carbon deposits, avoids bearing blockages, and supports lifetime lubrication.
- Chemical Resistance: Resilient against concentrated acids, alkalis, organic solvents (e.g., gasoline), and steam, making it suitable for chemical environments.
- Material Compatibility: Compatible with most plastics (e.g., PTFE) and rubbers, including fluorine-based elastomers (FKM), without causing material degradation.
- Eco-Friendly and Safe: Biodegradable formulation, free from sodium nitrite, and certified food-grade.
- Lubrication Efficiency: Reduces friction and wear, resists rust, dissipates heat, extends equipment lifespan, and minimizes maintenance frequency.

- High-Temperature Bearings and Transmission Systems:
    - Kiln car bearings, calender bearings, fan bearings (continuous operation at 260°C).
- Conveyance and Molding Equipment:
    - Conveyor belt rollers, injection mold ejector pins, sliding rails.
- Chemical and Valve Sealing:
    - Corrosion-resistant valves, pump system seals (static/dynamic), liquid level meters (acid/alkali-resistant).
- Food and Pharmaceutical Machinery:
    - Baking oven chains, frying equipment bearings (NSF-H1 certified for food-safe contact).
- Specialized Scenarios:
    - High-pressure switch contact lubrication, vacuum pump sealing (e.g., L55/3 HV specialty models).

    - Initial Lubrication Requirements: Thoroughly clean friction points using solvents like P-XZ 3-1 to remove residual grease.
    - Bearing Design: Equip bearings with seals or covers to prolong service life.
    - Re-Lubrication Cycle: Designed for extended intervals due to low evaporation rate (for continuous lubrication, consider L55/0 or L55/1 alternatives).